YOUR LOCATING: HOME » Products > Slurry Pumps

The AM(R) horizontal centrifugal slurry Pump

The AM(R) series horizontal centrifugal slurry Pump is the heavy duty pump handling tough and abrasive duties intended for clear liquids. It is the pump transporting Solid-liquid mixture with solid suspending (like ore, sand, gravel, ash and slime etc.) or the abrasive strongly and high concentration slurry. The heavy and robust slurry pump and perfect used perfect impeller structure ensure satisfactory performance with long life and needs minimum maintenance requirements. The rubber liner slurry pump of AMR series expand the applications to chemical products handling, several different rubber options are avaiable to meet different application needs.
  • /images/up_images/20151119212355.jpg
  • /images/up_images/20151119212356.jpg
  • /images/up_images/20151119212357.jpg
  • /images/up_images/20151119212358.jpg
  • /images/up_images/20151119212359.jpg
  • /images/up_images/2015111519110.jpg
The AM(R) series centrifugal horizontal slurry pumps are the best slurry pump for wear life, component arrangement and maintenance.

The Extra-Thick Wet End Components make the AM(R) series centrifugal horizontal slurry pump could handle the liquid with abrasive solid particles and extend the wear life Max, increase the mean time between filures with lowest maintenance by reasonable component arrangement!!!

● The Large diameter, slow turning, high efficiency impellers designed to achieve maximum wear life and lowest maintenance
● The Large, open internal passages designed to reduce internal velocities, maximize wear life and lowest maintenance
● Heavy duty construction with through-bolt design provides ease of maintenance and Min downtime
● The Replaceable and Interchangeable Wet End Parts are lower the stocking cost, easy to repair and Min downtime
● The Ductile iron fully lined casing provides durability,strength, safety, and long service life recommended while the Grey iron liner is the economic solution could satisfied the most customers required especially when you dont need the pumps work at 24x7
● Minimal shaft/impeller overhang reduces shaft deflection and increases packing life and the mean time between failures
● Cartridge-style bearing assembly allows for maintenance in a clean environment without removal of the pump, resulting in reliable operation and prolonged bearing life, which is another way to increase the mean time between failures
● Grease or oil lubrication bearing assembly options offer ease of maintenance and reduced downtime
● Lower NPSH requirements results in enhanced hydraulic performance and extended the wear life
● The metal or rubber parts are available for different work conditions Max the wear life and lowest the maintenance cost

The AM(R) horizontal centrifugal slurry Pump    The AM(R) horizontal centrifugal slurry Pump    The AM(R) horizontal centrifugal slurry Pump    The AM(R) horizontal centrifugal slurry Pump

Applications

The AM(R) series centrifugal horizontal slurry Pump is the pump for highly abrasive/dense slurries in processes from cyclone feed to regrind, mill discharge, flotation, mine drainage and tailing in minerals plants plus other industrial applications.

Sometimes, it could also be used in dredging of settling lagoons and pumping of drilling mud etc.

• Mining • Mineral processing • Construction  • Chemical and Fertilization • Power generation 
• Pulp and paper • Oil and gas • Waste water treatment

• Ball mill discharge • Rod mill discharge • SAG mill discharge • Fine tailings • Flotation • Heavy media process • Minerals concentrate • Mineral sands
• Coal-washing plant • Coarse sand • Coarse tailings • Dredging • FGD • Wet crushers Applications • Wet scrubber systems • Process chemical 
• Iron and Steel • Ni acid slurry • Fracking slurries • Clay and sand slurries • Kaolin clay • Carbon slurry • Lime mud• Oil sands • Phosphoric acid 
• Phosphate matrix fertilization • Pulp and paper • Waste sludge • Paper mill wastes and liquors  • Precipitated CaCO3 • Plaster • Bottom/fly ash, lime grinding • Dirty water 

Expeller Seal   Packing Seal   Mechanical Seal

 AM centrifugal horizontal slurry pump composition

 AM series Centrifugal Horizontal Slurry Pumps Composition                                

Centrifugal Seal Type (Expeller Seal)

1.   Volute Liner

2.   Frame Plate

3.   Frame Plate Liner Insert (FPL Insert)

4.   Cover Plate

5.   Throat Bush*

6.   Impeller

7.   Expeller Ring

8.   O Ring

9.   Expeller

10. Bearing Assembly

* AM slurry pump have the Throat Bush from 4"


 AMR centrifugal horizontal slurry pump

 AMR series centrifugal horizontal slurry pump composition

Centrifugal Seal Type (Expller Seal)

1.   Frame Plate

2.   Expeller Ring

3.   Gland

4.   O Ring

5.   Expeller

6.   Frame Plate Liner

7.   Impeller

8.   Cover Plate Liner

9.   Cover Plate



Spare parts and parts No. list
1. Impeller *147   2. Volute Liner *110   3. Throat Bush *083   4. FPL insert *041   5. Frame Plate Liner *036   6. Cover Plate Liner *018
7. Frame Plate *032   8. Cover Plate *013   9. Bearing Assembly *005
10. Intake Joint Ring *060   11. Discharge Joint Ring *132   12. Volute Liner Seal *122   13. O Ring *064/*109
The AM(R) horizontal centrifugal slurry Pump Atlas Curve


The AM(R) horizontal centrifugal slurry Pump DimensionThe AM(R) horizontal centrifugal slurry Pump Dimension
The AM(R) horizontal centrifugal slurry Pump Dimension
Copyright © 2014 BeiJing Century Pump Co.,Ltd All Rights Reserved